TGFC俱乐部>>游戏业界综合讨论区>>
- 刷新/显图/登录/注册/WEB
标题:请教PS4手柄校准问题
时间:21-05-12 09:39
作者:jidatui

PS4手柄的右摇杆鬼畜抖动、不居中,换了一个新的小摇杆,没什么改善。
印象中有人贴出过校准的秘籍,利用各种组合键进行校准,有点类似于更改工厂设置。
但是帖子找不到了,哪位还记得方法?多谢





回复列表 (8)
#2 flashback 2021-5-12 10:05
posted by wap, platform: iPhone
所谓校准就是扩大摇杆的“死区”,用不灵敏换不漂移。
PS4系统里不知道哪里可以,有些游戏里可以改。
接PC玩Steam可以,steam设置里有校准手柄的选项。

===================
#3 jidatui 2021-5-12 10:10
posted by wap, platform: Lenovo
上次有网友贴的校准方法,是在PS4手柄本身操作,不需要借助主机和PC,类似于更改工厂设置,可惜我没保存。

===================
#4 ionkiller 2021-5-12 10:12
这个看症状大概率像电位器磨损导致的,尝试清理一下电位器外壳内测部分,并且替换一下电位器里那个圆形的小组件试试看,电位器TB有卖,几毛钱一个,记得撬开的时候手法轻一些,针脚断了就只能上电烙铁了

===================
#5 jidatui 2021-5-12 10:15
原帖由 ionkiller 于 2021-5-12 10:12 发表
这个看症状大概率像电位器磨损导致的,尝试清理一下电位器外壳内测部分,并且替换一下电位器里那个圆形的小组件试试看,电位器TB有卖,几毛钱一个,记得撬开的时候手法轻一些,针脚断了就只能上电烙铁了


整个摇杆都换新了,还是同样的问题,感觉是出厂设置的问题。

我打算买两个最贵的摇杆,再换上去试试。

===================
#6 pk1308 2021-5-12 12:00
posted by wap, platform: iPhone
只知道NGC手柄有个重置功能。



===================
#7 唯心主义者 2021-5-12 17:05
怼下手柄背面的小圆孔?

How to calibrate ps4 controller?
1.Turn off the PlayStation 4. 2.Locate the small reset button on the back of the SCUF 4PS near the L2 shoulder button. 3.Use a small, unfolded paper-clip or something similar to push the button (the button is inside a tiny hole). Hold the button down for a couple of seconds and release.

===================
#8 jidatui 2021-5-12 17:41
posted by wap, platform: Lenovo
原帖由 @唯心主义者 于 2021-5-12 17:05 发表
怼下手柄背面的小圆孔?

How to calibrate ps4 controller?
1.Turn off the PlayStation 4. 2.Locate the small reset button on the back of the SCUF 4PS near the L2 shoulder button. 3.Use a small, unfolded paperclip or something similar to push the button (the button is inside a tiny hole). Hold the button down for a couple of seconds and release.
有点靠谱了,以前有网友贴了一大段中文的,非常复杂,可惜搜不到了。

===================
#9 好Ady 2021-5-12 21:07
ds3好像和背面两块橡胶有关系,ds4的设计不一样,但我拿仪器清洁剂清洗过就正常了,会不会再漂就不知道了

===================


[登录后才可回复]